Dorsey Metrology International
This comparator offers 2 or 3 point measurements for both ID and OD on one benchtop plate. Features include two or three point measurement, linear ball bushing movement and a wide range of adjustment. The fixture can be positioned at any angle from horizontal to vertical to duplicate the machining process angle eliminating deflection and deformation variation as potential sources of error. Hardened steel work surfaces insures years of accurate trouble free use.
BC Bench Comparator Features:
- Gage is supplied with model 2DM025-01 .0001" graduation 1:1 dial indicator, 3 contact holders and BCC-GS25 contact set
- Reversing the top plate selects either ID or OD
- Base with carrying handle features 90 degrees of adjustment with angle locking mechanism
- .400" linear gaging or retraction range
- Patented precision linear ball bushing gaging mechanism
- Witness lines aid with gage alignment
- Ground and plated work stage 5.25" x 6.75" on BC1 and 9.75" x 10.75" on BC2
- Includes fitted wooden storage case
- 2 Hex adjustment wrenches
| Attachment | Size |
|---|---|
| Bench Comparator Features & Models | 1.26 MB |
Part Number
BCC-GS25
Part Number
2760-S
BC Carbide Sharp Contact Holder
Part Number
2760-C
Part Number
BCC-CB25
Part Number
2759-S
BC Carbide Flat Contact Holder
Part Number
2759-C
Part Number
2DMR025-017
Graduation/Resolution
.0001"
Travel/Range
.020"
Revolutions
2.50
Travel Per Rev
.008"
Part Number
2DMR125-05
Graduation/Resolution
.0006"
Travel/Range
.100"
Revolutions
2.50
Travel Per Rev
.040"
Part Number
2DMR005-002mm
Graduation/Resolution
0.002mm
Travel/Range
0.4mm
Revolutions
2.50
Travel Per Rev
0.16mm
Part Number
2DMR5-01mm
Graduation/Resolution
0.01mm
Travel/Range
4.0mm
Revolutions
5.00
Travel Per Rev
0.8mm